Tutorial crafts hereinafter as using empty bottles of drinking water to be a tool. Can be used to cool the room, namely the fan. Yak for this post we will discuss about the tutorial how to create a simple fan of the bottles.HOW TO MAKE A SIMPLE FAN OF WASTE WATER BOTTLEImmediately to shorten, just go ahead. The first stage of preparing the equipment and materials required:1. The used plastic bottles2. Cutter / Scissors3. Nails and hammer4. Glue5. sterofom6. Dinamo, battery and switch (equipment kelistikan)The step of making a simple fan of the bottles are:1. Cut the bottles into two parts
2. Create a pattern for the rotor blades and cut according to the pattern.
3. Bend the propeller blades to the outside and cut the tip of the corner of propeller blades.
4. Burn the tip of the propeller blades to be easily formed.
5. Punch a hole lid using a nail and a hammer to a dynamo.
6. Give the glue in the holes and insert the armature into the hole closed.
7. Shape sterofom for supporting and mounting the armature.
8. Put the dynamo above buffer by using glue.
9. Replace the battery and switch on sterofom using glue. Compose and electrical system.10. Install the propeller blades on the cap.11. The process of making the fan has been completed.
may usefull...thanks..
2. Create a pattern for the rotor blades and cut according to the pattern.
3. Bend the propeller blades to the outside and cut the tip of the corner of propeller blades.
4. Burn the tip of the propeller blades to be easily formed.
5. Punch a hole lid using a nail and a hammer to a dynamo.
6. Give the glue in the holes and insert the armature into the hole closed.
7. Shape sterofom for supporting and mounting the armature.
8. Put the dynamo above buffer by using glue.
9. Replace the battery and switch on sterofom using glue. Compose and electrical system.10. Install the propeller blades on the cap.11. The process of making the fan has been completed.
may usefull...thanks..
No comments:
Post a Comment